RIOP20D

RIOP20D

2-channel incremental encoder counter module, 5V-differential, 500kHz

Supports two types of orthogonal encoder inputs, with a counting rate of up to 500KHz. Supports linear counting from 0-4294967295 with 32 bits. Supports ring counting and 4x/2x/1x counting rates. Features power-off memory function, Z-phase reset, and four configurable latch channels.

interface data

Data Transfer MediumX-bus backplane bus
Data Transfer Rates6Mb/s
Distance Between Stations22.5mm (distance between stations)
Electrical IsolationYes

technical data

Current Consumption44mA
Weight100g
Module Size106*73*25.7mm (installation width 22.5mm)
Protection ClassIP20
Operating Temperature-10~60℃
Storage Temperature-20~75℃
Relative Humidity95%, no coagulation

technical indicators

Process data volume: Downlink12Byte
Process data volume: Upstream20Byte
Digital IOInput: 4 ch ,PNP/NPN <br>Output: 4 ch ,PNP
Analog IONO
Encoder Input2 ch
Encoder signalOrthogonal
Counting rate≤500KHZ
Clearing Z PhaseSupport
Hardware latch functionConfigurable latch signal
Compare output functionNot supported at the moment
Counting Rate Setting4x/2x/1x (default 4x)
Resolution SettingsSupports 0-65535 (default is 0)
Ring CountingSupports (0-resolution*counting multiplier-1)
Linear countingSupport (0-4294967295)
Setting the Initial Value of the CounterSupport
Hardware filteringSupport: 0-15 (default 7)
Count Range SelectionSupport:(0-4294967295‬)
Reverse countingSupport